Some sounds, such as the alarm sounded by an ambulance we must learn to live with. Others we should seek to silence. The noise created by a shaking washer belongs in the latter category.
Check to see if the appliance needs to be leveled. Tip the washing machine, in order to determine which side ought to be propped up. Then use one of the leveling screws on the base to prop up the indicated side. If the screw will not turn, a shin made of any material should be placed under the foot that cannot be adjusted.
Take the time to put a balanced load in the washer’s tub. Make sure that one side does not get all the heavy items. Have the weight of the garments and linens spread out over the tub’s surface. Understand that this should not be a one-time action. It ought to be repeated each time that a load gets placed inside of the washer’s tub.
Ideally, implementation of those two measures will put an end to the shaking. If the washer continues to shake while being used, it may be time to contact a repair technician. By learning more about the additional ways to limit the shaking-related noise, a smart homeowner can reduce the amount of time that any appliance repair technician in Cambridge stays at the spot with the noisy appliance.
If a troubleshooter were to make a list of the most likely suspects, four different components would be on that list. Those would be the suspension spring, the tub spring, the snubber ring and the damper pad. Still, a trained technician could find that a different part needs to be fixed or replaced.
Like cars, washing machines have shock absorbers. You know what happens if a car’s shock absorbers fail to function properly. Washers can start shaking if their shock absorbers have some type of defect.
Like automobiles, not all washing machines are alike. Some call for the front-loading of any pile of dirty garments and linens. A front loader has 4 rubber dampening straps. If one of those breaks or gets frayed, that could trigger production of shaking.
The fact that a washing machine requires installation of certain noise-damping parts should not be viewed as evidence that it belongs on a list of poor-quality products. Lots of machines make a noise, one that manufacturers work to muffle. That is especially true in laboratories, where certain large pieces of equipment might need to operate.
Each large item comes with a dampening device. It does not harm any of the experiments being conducted in that same lab.